
Lutz Cabinet Refacing
Cabinet Refacing in Lutz, FL
Cabinet refacing in Lutz, FL. New doors, veneer, and hardware on your existing boxes, free written estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Lutz and nearby communities.
Lutz homes split pretty evenly between older homesteads near Lake Keystone with solid-wood boxes and newer subdivisions off US-41 with builder-grade construction. Cabinet refacing works on both. The boxes stay put, the doors, drawer fronts, and exposed surfaces get replaced or veneered over.
Lutz Cabinet Refacing checks box condition before quoting anything. A sound box with dated doors is a straightforward reface. A swollen or sagging one needs a different conversation first.
What's included
What's included with Cabinet Refacing
Typically included
- New doors and drawer fronts matched to your chosen style
- Veneer skins applied to exposed box faces and end panels
- New hinges and hardware installed throughout
- On-site measuring and a written scope before work starts
Optional
- Soft-close hinge and slide upgrades
- Crown molding added at the top of cabinet runs
- Interior organizers and pull-out trays
Customer prep
- Clear counters and empty cabinet contents before install day
- Flag any cabinets with past water exposure so they get checked first
Want a clearer scope?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Cabinet Assessment
Existing cabinet boxes are inspected for structural soundness before refacing begins.
Step 2Design Consultation
Clients review finish and style samples to plan the new cabinet appearance.
Step 3Box Preparation
Surfaces are cleaned and lightly sanded to help new materials adhere properly.
Step 4Veneer Application
Matching veneer is applied to exposed cabinet surfaces for a smooth finish.
Step 5New Door Fitting
Replacement doors and drawer fronts are installed to complete the updated look.
Step 6Quality Check
Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.
Materials
Materials and methods for Cabinet Refacing
Material choice matters more in Tampa Bay humidity than it does up north. Here's what holds up.

Rigid Thermofoil
A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance. It resists the peeling older vinyl-wrapped doors show after years of AC cycling.

Wood Veneer
Natural wood veneer offers an authentic grain look over existing cabinet boxes, popular in Lutz's older homestead kitchens where solid wood boxes are already in place.

Adhesive Bonding Agents
Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term, even through summer humidity swings.

Matching Drawer Fronts
New fronts are crafted to match replacement doors for a unified design across the whole kitchen.

Edge Banding
Edge banding finishes exposed panel edges for a clean, professional look that resists chipping.

Cabinet Hardware Sets
Coordinated hardware sets complete the refaced cabinetry with a polished finish.
Questions on materials?
Get a Free EstimateCost
What does cabinet refacing cost in Lutz?
Cost swings on three things: how many doors you're covering, the material grade, and whether the boxes need repair first. These are ballpark ranges, not a locked quote. Call (656) 206-2751 or ask for a free estimate and we'll walk your kitchen in person before pricing anything.
| Project type | Typical range | What’s included |
|---|---|---|
| Partial reface (single wall or pantry) | $2,500–$5,500 | covers a smaller run of doors, drawer fronts, and matching hardware. |
| Full kitchen reface | $6,000–$14,000 | all boxes veneered, new doors and drawers, hardware throughout. |
| Upgraded finish tier | $10,000–$18,000 | solid wood doors, soft-close hardware, custom color matching. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Cabinet Refacing
Lutz sits in both Hillsborough and Pasco counties, so the permit answer depends which side of the line you're on. Cosmetic refacing generally stays out of permit territory in either county. Verify specifics with Hillsborough County or Pasco County building services before scheduling, since your address determines which office applies.
| Typically needs a permit | Often no permit |
|---|---|
| Plumbing relocation tied to a sink or dishwasher cabinet | Replacing doors |
| Electrical work | drawer fronts |
| such as moving outlets behind new cabinet runs | veneer on existing boxes |
| Structural changes | Swapping hinges |
| like removing a load-bearing wall for an open layout | pulls |
| — | knobs |
| — | Adding crown molding or trim to existing cabinet tops |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Fine for swapping a single door or drawer front | Needed when multiple doors must align across a full kitchen run |
| Workable for basic hardware changes on a handful of cabinets | Worth it when humidity-rated adhesive has to bond veneer correctly the first time |
| Doable if you're comfortable measuring precisely and sourcing matching finishes | Important if boxes show any swelling, since prep work has to happen before refacing |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and after Cabinet Refacing

Before 
After
FAQs
Cabinet Refacing FAQs
What are the steps involved in cabinet refacing?
A specialist inspects the boxes, you pick doors and finishes, the boxes get prepped and veneered, new doors go on, then everything gets checked for alignment and smooth operation.
Is cabinet refacing worth it or should I just replace the cabinets?
If your boxes are square and solid, refacing gets you a new look for a fraction of full replacement cost and in a fraction of the time. Full replacement only makes sense when boxes are structurally compromised or you're changing the kitchen layout.
Will refacing fix cabinets that don't close right or sag?
Minor misalignment usually gets corrected during hardware fitting. Real sagging means a box problem, which needs repair before new doors go on, not just a hinge adjustment.
What's the difference between refacing and refinishing?
Refacing replaces doors and veneers the boxes. Refinishing strips and repaints or restains the existing wood without new doors. Refacing suits a style change; refinishing suits sound wood that just needs a fresh coat.
Do refaced cabinets hold up in a humid Florida kitchen?
When the right materials and adhesives go on. Rigid thermofoil and humidity-rated bonding agents are built for the swings a Tampa Bay kitchen sees year-round.
Next step
Get a Cabinet Refacing estimate in Lutz
Call (656) 206-2751 for a free, no-pressure estimate, or fill out the contact form and we'll get back to you with next steps.
---
More services
Other Cabinet Refacing services

Kitchen Cabinet Refacing
Kitchen cabinet refacing near Lutz, FL covering full kitchens, all boxes, doors, and hardware, free estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Lutz, FL fixes swollen or dated vanities with moisture-resistant doors and veneer. Free estimates, honest pricing.

Cabinet Door Replacement
Cabinet door replacement in Lutz, FL. New doors and drawer fronts matched to your boxes, free estimates.
Ask about Cabinet Refacing
Tell us about the project and how to reach you.