Lutz Cabinet Refacing logoLutz Cabinet RefacingLutz, FL
Menu
crown molding addition in Lutz, FL

Lutz Cabinet Refacing

Crown Molding Addition in Lutz, FL

Crown molding addition in Lutz, FL finishes refaced cabinets with a built-in look. Free estimates, matched finishes, clean corner fits.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Lutz and nearby communities.

Crown molding addition closes the gap between the top of your cabinets and the ceiling with a finished, built-in profile. It's not a structural change and it's not a standalone fix for tired doors, it's the detail that makes a refacing job look custom instead of stock. Lutz Cabinet Refacing adds molding during or after a refacing project, cut and fitted to the actual ceiling line in your kitchen rather than a one-size trim kit.

This fits well in the newer, higher-ceiling subdivisions around Lutz where homeowners want that built-in cabinetry look, and in older homes where the original cabinets never had any molding at all. Either way, the molding gets color-matched to the new doors so it reads as one finished piece, not an add-on.

What's included

What's included with Crown Molding Addition

Typically included

  • Ceiling-line measurement and molding profile selection
  • Cutting and fitting molding at corners and transitions
  • Attachment to cabinet tops with finish nails and adhesive
  • Stain or paint matched to your refaced cabinet doors

Optional

  • Lighted cabinet-top valance for under-cabinet or accent lighting
  • Corner molding blocks for rooms with complex angles or bulkheads

Customer prep

  • Clear the top of your cabinets of decor or storage before the visit
  • Have a ceiling height and layout in mind if you're adding this to a new refacing job

How it works

How our Crown Molding Addition process works

  1. Space Measurement photo
    Step 1

    Space Measurement

    Cabinet tops are measured to determine molding length and angles needed.

  2. Molding Style Selection photo
    Step 2

    Molding Style Selection

    Clients choose molding profiles that complement their cabinet design.

  3. Cutting and Fitting photo
    Step 3

    Cutting and Fitting

    Molding pieces are cut to precise angles for proper corner fitting.

  4. Surface Preparation photo
    Step 4

    Surface Preparation

    Cabinet tops are prepared to ensure secure molding attachment.

  5. Molding Installation photo
    Step 5

    Molding Installation

    Molding is attached and secured along the tops of cabinet runs.

  6. Finish Touch-Ups photo
    Step 6

    Finish Touch-Ups

    Seams and edges are finished to blend molding with existing cabinetry.

Materials

Materials and methods for Crown Molding Addition

Molding choice depends on your ceiling height, cabinet style, and whether you're pairing it with new doors or adding it to cabinets you're keeping as-is.

  • Crown Molding Profiles photo

    Crown Molding Profiles

    A range of molding profiles add decorative detail above cabinetry, from a simple ogee curve to a layered build-up for taller ceilings.

  • Wood Molding Strips photo

    Wood Molding Strips

    Solid wood strips provide a traditional, durable molding option that holds paint or stain well in a Florida kitchen's AC-cycling environment.

  • Molding Adhesive photo

    Molding Adhesive

    Strong adhesive secures molding firmly to cabinet surfaces so it doesn't loosen as humidity shifts seasonally.

  • Finish Nails photo

    Finish Nails

    Finish nails provide additional support for molding installation, especially on longer runs over wider cabinet spans.

  • Matching Stain or Paint photo

    Matching Stain or Paint

    Finish is matched to existing cabinetry for a cohesive appearance so the molding reads as original, not bolted on.

  • Corner Molding Blocks photo

    Corner Molding Blocks

    Corner blocks simplify fitting at complex cabinet angles, common in L-shaped kitchens and islands with multiple return corners.

Cost

What does crown molding addition cost in Lutz?

Cost depends mostly on linear footage of cabinet tops, the molding profile chosen, and whether it's bundled with a larger refacing job. Call (656) 206-2751 or request a free estimate for an exact number based on your kitchen's layout. <!-- rover-autofix-links -->

Project typeTypical rangeWhat’s included
Simple single-profile molding$300–$800basic profile across a standard kitchen's cabinet run.
Layered or built-up molding$800–$1,800multi-piece profile for a taller, more custom look.
Bundled with a full refacing job$200–$600added to the project, since boxes are already being prepped and finished.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Next step

Get a Crown Molding Addition estimate in Lutz

Ready for the finished look on your cabinets? Call (656) 206-2751 or request a free estimate and we'll measure your kitchen and quote the molding on the spot.

DIY vs pro

DIY vs hiring a pro for Crown Molding Addition

DIYHire a pro
Fine for a single flat-profile run on a simple, square kitchenWorth it for layered profiles, islands, or rooms with out-of-square corners
Pre-primed molding kits from a home center work for basic jobsA pro cuts and copes corners so seams disappear instead of gapping
Risk: corner cuts on anything but a true 90-degree angle are easy to get wrongFinish matching to your actual cabinet color, not a close guess from a paint chip

FAQs

Crown Molding Addition FAQs

Is crown molding worth the cost on a kitchen I'm already refacing?

If you want the built-in look. It's one of the lower-cost add-ons relative to the full refacing job and it's the detail most homeowners notice when comparing a finished kitchen to a basic door swap.

Can molding be added without refacing the whole kitchen?

Yes. Molding attaches to the tops of your existing cabinet boxes and can be added on its own, though the finish will be matched to your current cabinet color.

Does Florida humidity affect how molding holds up over time?

Properly adhered and finished molding holds up fine. The adhesive and fasteners we use account for seasonal humidity swings so it doesn't loosen or gap at the seams.

How long does a crown molding addition take?

A standard kitchen run usually takes one day for measuring, cutting, and installing, with finish touch-ups done the same visit .

What's the most expensive part of adding molding to a kitchen?

Linear footage and profile complexity drive cost more than anything else. A simple single-profile molding across a small kitchen costs far less than a layered build-up across a large island and perimeter run.

Will the molding match my existing cabinet color exactly?

We color-match the stain or paint to your current cabinets or new refaced doors during the finish step, so the final look reads as one continuous piece.

Ask about Crown Molding Addition

Tell us about the project and how to reach you.

Call (656) 206-2751